Petroleum Products Flash And Fire Points Testing And Water Content Testing

Application

Petroleum products is widely used in our daily life. So the safety usage is most important. To confirm the different petroleum products flash and fire points, we will do it by the Cleveland open cup method and Pensky-Martens closed cup method, and Rapid equilibrium closed cup method. To check what the water content will affect the features in the liquid petroleum products, then we will determine water content by Coulometric Karl Fischer Titration method.

Standard

ASTM D 92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

ASTM D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester.

ASTM D1533 Standard Test Method for Water in Insulating Liquids

ASTM D6304 Standard Test Method for Determination of Water in Petroleum Products,Lubricating Oils and Additives by Karl Fischer Titration.

SY-3536 Cleveland Open Cup Flash Point Tester

Parameters:

Features:

1. The heating power is continuously adjustable. It can meet requirements of test.

2. The instrument is fully self-contained complete. The operator can do determination as long as connecting with coal gas or other civil gas.

3. With fast cooling function, it can improve test efficiency.

4. It adopts special heating furnace to ensure the safety of test.

SY-261A Automatic Pensky-Martens Closed-Cup Flash Point Tester

Parameters:

Features:

1. Automatically calibrate the effect of atmospheric pressure to test and calculate the corrected value.

2. Equipped with prompt function of test date, test time and other parameters.

3. Simulation tracking displays function curves of heating up and test time.

4. Equipped with the English prompt function of mis-operation.

5. Igniting with electric igniting gun, forced air cooling.

6. Differential coefficient detection. Automatically correct the system deviation.

7. Automatically open the lid, detect the flash point and print test data.

8. The test arm rises up and lowers down automatically.

SY-2122C Coulometric Karl Fischer Titrator

Parameters:

Features:

1. The unique alternating balance isolation detection technology makes the balance detection more rapid, accurate and stable.

2. It can store 20000 experimental results, easy to query.

3. The imported 0.5ul injector for calibration is equipped, and the calibration of the instrument is fast and accurate.

4. It can be used for micro analysis of low content samples with high sensitivity.

5. The electrolysis circuit adopts advanced PWM pulse width modulation technology, which greatly reduces the power consumption of the whole machine.

6. Friendly man-machine dialogue, with touch screen man-machine interactive interface.

7. Display the clock (year, month, day, hour, minute and second) and keep it when power down.

8. Printer: embedded thermal printer, 36 characters, Chinese characters output, Printing is quieter, faster and clearer.

9. Program control is adopted to adjust the mixing speed by inputting numbers directly from the interface.

10. Multiple formula selection, automatic change of display units (ug, mg / L, ppm,%) can be memorized. It can be used for micro analysis of low content samples with high sensitivity.

Beijing Samyon Instruments Co., Ltd is specializing on designing, developing and selling concrete Pile Testing Instruments and Optical fiber bragg Grating(FBG. )

1.Concrete Pile Testing Instruments includes: High strain dynamic pile tester, Pile integrity tester, Static pile loading tester, Ultrasonic crosshole pile tester, Ultrasonic drillhole monitor, Nonmetal ultrasonic detector and NDT (Non Destructive Testing) equipments, construction instruments, and laboratory instruments, such as, Concrete resistivity tester, Concrete migration tester, Concrete penetration tester, Crack width/depth meter, Rebar location system, Test hammer, Strength tester, Concrete defect tester, Corrosion tester, Colorimeter, Hardness tester, Ultrasonic flaw detector, Concrete testing equipment, Soil testing equipment, Cement testing equipment, Asphalt testing equipment, and so on . The company takes the science and technology as the guide, with strict management and strong research and development team.

    High Strain Dynamic Pile Tester (Also named PDA by PDI company. )  ;  Low Dynamic Pile Tester (PIT or PET for short); Untrasoic Crosshole Pile Tester for 2, 3 ,4 channels.; Drillhole Monitor  (Also named Koden from Japan company. )

High Strain Dynamic Pile Tester projects at field. If clients need, we also can do the testing compare with PDA from PDI company. We already have done testing at different countries. We got very good feedback from our professional pile testing clients and relative company. 

Low Strain Dynamic Pile Tester at field with our software;  Static Load Pile testing at field with our software. 

Drill hole monitor testing at field with 100meter depth, with automatic stop function to save untrosonic sensor drop in wells making lost for inspection company.  We also can supply drillhole monitor with 150m depth.

2. Optical Fiber Bragg Grating for temperature and Strain gauge

As FBG strain gauge and temperature sensor are popular in construction monitor system, we also concentrate in this aspects for many years. DTS. DVS system. 

Our Lab for optical fiber bragg grating 

Oven Humidity and temperature testing. 

SAMYON will follow the operation principle to pay more attention to the needs of customers and provide the high quality, competitive products and convenient services to the market with outstanding research and development ability and the exquisite technology.
With more than 10years experiments, SAMYON commits us supply professional line instruments and service to our clients refers to Building, Bridge, Highway, Channel, Airport and so on. At present, we have many international customers from European countries, UK, USA, Thailand, India, Indonesia, South Africa, Pakistan, Singapore, Austrilia, Vietnam, Russia, Brazil, Chile, and so on.